High-Purity Pure Iron Rods

High-Purity Pure Iron Rods

High-purity pure iron rods at 99.7–99.9% Fe, Drawn or ground, cut to length, MTC per lot.
Send Inquiry
Add To Inquiry
Description

Product Introduction

Our high-purity pure iron rods are produced with iron content ≥99.9% and tightly controlled gas and residual elements-carbon ≤0.003%, oxygen ≤0.004%, nitrogen ≤0.005%-making them suitable for demanding magnetic, alloying, and research applications. Supplied in custom diameters and lengths, with as-rolled, peeled, or polished surface options. Each batch is verified by full chemical and gas analysis and shipped with a Mill Test Certificate.

Overview

Most industrial pure iron is specified around carbon, sulfur, and phosphorus. But for high-purity applications, the decisive elements are often oxygen, nitrogen, and residual tramp metals. Oxygen forms oxide inclusions that raise coercivity and reduce fatigue life. Nitrogen forms nitrides that embrittle the material. Residual elements such as chromium, copper, and nickel can alter magnetic and corrosion behavior even at low levels.

Quick Specifications

Parameter Value
Iron Purity (Fe) ≥99.9% 
Carbon (C) ≤0.002%
Sulfur (S) ≤0.003%
Phosphorus (P) ≤0.003%
Oxygen (O) ≤0.003% (≤30 ppm)
Nitrogen (N) ≤0.003% (≤30 ppm)
Hydrogen (H) ≤0.00015% (≤1.5 ppm)
Diameter Custom
Length Custom
Surface As-rolled, peeled, or polished
Standard GB/T 9971 / customer specification

Typical Applications

Soft magnetic components – relay cores, pole pieces, magnetic shielding

Precision alloy melting – base iron for magnetic and expansion alloys

Superalloy feedstock – low-gas iron for vacuum melting

Research and development – high-purity feedstock for material trials

Electronics and instrumentation – magnetic sensors and measuring devices

Specialty welding and deposition – clean iron for controlled deposits

Frequently Asked Questions

Q: How is purity verified?

A:  Each batch undergoes chemical analysis for metallic elements and inert gas fusion analysis for oxygen, nitrogen, and hydrogen. Results are documented in the Mill Test Certificate.

Q: What is the difference between this and standard pure iron rod?

A:  Lower carbon, sulfur, and phosphorus, plus controlled oxygen and nitrogen. This reduces inclusions and improves magnetic and melt performance.

Q: Can I customize diameter and length?

A: Yes-both are made to your requirement.

Q: Is this suitable for vacuum melting?

A: Yes-low oxygen and nitrogen make it suitable as VIM feedstock. For stricter gas limits, ask about our VIM-ready grade.

Q: What is the minimum order quantity?

A: Flexible-trial quantities and production lots are both welcome.

Request a Custom Solution

Click Send Inquiry below and tell us your detailed requirements-including diameter, length, purity target, surface finish, quantity, and application. Our technical team will review your inquiry and reply within 24 hours with a tailored solution and quotation.

Please include: diameter and length · purity or gas targets · surface · quantity · application and end use

 

Hot Tags: high-purity pure iron rods, China high-purity pure iron rods manufacturers, suppliers, factory, Pure Iron Rod without Hairline, Steelmaking Pure Iron Rods, Raw Material Pure Iron Rod, Electric Arc Furnace Pure Iron Rods, pure iron round bar, Casting Pure Iron Rods

Send Inquiry