Annealed Pure Iron Plates

Annealed Pure Iron Plates

Annealed pure iron plates are engineered materials crafted through a controlled thermal process known as annealing. This treatment involves heating iron to a specific temperature and then cooling it slowly, which reduces internal stresses, refines grain structure, and enhances mechanical properties. The result is a material with uniform texture, improved ductility, and optimized magnetic performance, making it indispensable in industries requiring high precision and reliability.
Send Inquiry
Add To Inquiry
Description

Product Definition

Annealed pure iron plates represent the pinnacle of soft magnetic materials, manufactured through precisely controlled thermal processing (>99.8% Fe) to achieve exceptional electromagnetic properties unattainable with standard cold-rolled variants. Unlike conventional cold-rolled sheets that retain work-hardened dislocation structures, annealing at 780°C±20°C under inert atmosphere triggers complete recrystallization-transforming strained grains into uniform 15–25μm equiaxed microstructures. This process eliminates residual stresses while reducing coercivity to ≤80 A/m and increasing permeability to 5,000–10,000 μH/m. The result is a material uniquely suited for applications demanding minimal hysteresis losses, high flux density, and dimensional stability under dynamic magnetic fields.

Technical Specifications

Parameter

Specifications

Testing Standard

Purity

≥99.8% Fe (DT4C/DT4E grades available)

Spark OES

Thickness Range

0.14 mm – 6.0 mm (custom widths up to 1,850 mm)

ASTM A370

Coercivity (Hc)

≤80 A/m

IEC 60404-4

Permeability (μi)

5,000–10,000 μH/m

IEC 60404-4

Tensile Strength

180–250 MPa (Dead-Soft Annealed)

ASTM E8

Elongation

≥40%

ISO 6892-1

Surface Finish

Matte (Ra 0.5–2.0 μm) to Bright (Ra ≤0.1 μm)

ISO 4287

Note: Custom annealing cycles (subcritical/recrystallization) available for balancing ductility vs. magnetic performance.

The Annealing Advantage: How Thermal Processing Transforms Performance

1. Recrystallization-Driven Property Enhancement

During annealing, cold-rolled pure iron undergoes three critical phase changes:

- Recovery (300–450°C): Dislocation rearrangement reduces residual stresses by 85% without altering grain morphology.

- Recrystallization (550–720°C):Strain-free grains nucleate, replacing deformed structures and restoring ductility (elongation jumps from <10% to >40%).

- Grain Growth (>750°C): Controlled coarsening optimizes domain wall mobility, slashing hysteresis losses by up to 30% compared to unannealed material.

2. Atmosphere-Controlled Decarburization

Our proprietary continuous annealing employs N₂-H₂ mixtures (dew point: -45°C) to achieve:

- Carbon Reduction: Final C content ≤0.005%, eliminating magnetic aging risk.

- Surface Oxide Prevention: Oxygen partial pressure maintained below 10⁻²⁵ atm, preserving bright surfaces without pickling.

3. Texture Optimization

Post-annealing cooling rates (15–30°C/s) promote Goss ({110}<001>) and cube textures, enhancing permeability along specific orientations.

Why Engineers Specify Annealed Over Cold-Rolled Pure Iron

1. Enhanced Formability: Annealed plates achieve r-values >1.8, enabling deep-drawn enclosures with 30% reduction ratios without edge cracking.

2. Stable Performance: Decarburization to <0.005% C prevents magnetic aging-guaranteeing μ stability within ±3% over 10+ years.

3. Noise/Vibration Reduction: Uniform grain structure cuts magnetostriction-induced humming in transformers by 12dB(A).

4. Welding Compatibility: Low carbon equivalence (Ce<0.12) permits TIG welding without HAZ embrittlement-critical for sealed shielding enclosures.

FAQs

Q: How does annealing affect corrosion resistance?

A: While annealing removes residual stresses that accelerate corrosion, pure iron still requires protective coatings (electroless Ni, Zn-Ni) for humid environments. We offer pre-plated options with adhesion-promoting matte finishes.

 

Q: Can I achieve both high strength and low coercivity?

A: Yes-skin-rolled tempers (3–5% reduction post-annealing) increase yield strength to 280MPa while maintaining Hc ≤95 A/m. Ideal for vibrating armatures.

 

Q: What cutting methods are recommended?

A: Waterjet (abrasive-free) or fiber laser (1–2kW N₂-assist) prevents edge hardening. Mechanical blanking requires polished dies with ≤3μm clearance.

Value-Added Processing

- Precision Slitting: Tolerances to ±0.02mm with burr-free edges

- Surface Treatments: Ni-Flash (0.5–3μm), chromate passivation, or insulating varnishes

- Stress Relief Annealing: For machined parts to restore magnetic properties

Hot Tags: annealed pure iron plates, China annealed pure iron plates manufacturers, suppliers, factory, electrical pure iron for relays, electrical pure iron core, cold rolled electrical pure iron, electrical pure iron rod, electrical pure iron for induction, electrical pure iron product

Send Inquiry