Product Overview
Soft magnetic iron is chosen for one reason: it conducts magnetic flux with minimal loss and drops its magnetism the moment the field is removed. We supply DT4-series pure iron in billet, bar and sheet, with magnetic properties verified per batch.
Typical Chemistry
| Element | Max % |
|---|---|
| C | 0.002 |
| Si | 0.0061 |
| Mn | 0.0692 |
| P | 0.01 |
| S | 0.004 |
| Fe | Balance |
Critical Composition Advantages:
- Ultra-Low Carbon (≤0.002%): Eliminates magnetic aging and ensures stability
- Controlled Silicon (≤0.0061%): Optimized for minimal eddy current losses
- Low Oxygen (≤30 ppm): Prevents oxide inclusions that disrupt magnetic domains
- Trace Elements Control: Cu+Cr+Ni+Al < 0.05% total
Available Forms
Billet 50×50 – 200×200 mm
Round bar Ø 6.5 – 150 mm
Sheet 0.5 – 6.0 mm
Typical Applications
Electromagnet poles · relay and solenoid cores · magnetic shielding · transformer shunts · sensor cores
Frequently Asked Questions
Q: Do you supply magnetic test data?
A: A: Yes, Hc and permeability per batch on request.
Q: Is soft magnetic iron the same as non-magnetic?
A:No. Soft magnetic conducts flux but does not stay magnetized. Non-magnetic means it refuses flux - different material.
Q: What is the minimum order?
A: A: From 2 ton for stock sizes; custom chemistry needs a dedicated heat.
Q: Can you cut to my dimensions?
A: A: Yes, billet, bar and sheet are all cut to order.
Send Inquiry Leave a message below and tell us your detailed requirements. Our technical team will review your inquiry and reply within 24 hours with a customized solution and quotation tailored to your needs.
Hot Tags: Soft Magnetic Iron — DT4 High Purity, China Soft Magnetic Iron — DT4 High Purity manufacturers, suppliers, factory, electrical pure iron bar, cold rolled electrical pure iron, electrical pure iron for electronics, electrical pure iron for solenoids, hot rolled electrical pure iron, electrical pure iron for transformer

