Precision Chemistry Pure Iron Billet

Product Overview

Our precision-chemistry pure iron billet is produced from 17-ton electric-furnace slabs with documented heats, then saw-cut to your cross-section and length. It is intended for foundries and superalloy makers who buy iron not for its own properties, but as a dilute meltstock where tramp elements in the feedstock directly end up in the finished alloy.

Typical Chemistry (per heat, confirm on MTC)

Element	Typical Range	Note
C	≤ 0.002%	Ultra-low carbon meltstock
Si	≤ 0.002%
Mn	≤ 0.02%
P	≤ 0.003%
S	≤ 0.002%
Als	0.003 – 0.008%	Controlled for deoxidation
N	≤ 20 ppm
O	≤ 60 ppm
Fe	≥ 99.9%	Balance

Available Forms & Dimensions

Form	Range	Tolerance
Square billet	50-× 50 – 200 × 200 mm	±5mm
Round bar	Ø 30 – 150 mm	±2mm
Cut length	100 – 2000 mm	±2 mm
Custom slab	Per drawing	Per drawing

Key Applications

Vacuum induction melting (VIM) charge material

Ni-based / Co-based superalloy master melt

Soft magnetic alloy premelt

Precision instrument alloy feedstock

Quality & Packaging

Every heat ships with a Mill Test Certificate (EN 10204 3.1) showing the chemistry above. Stock is cut, shot-blasted to clean scale, strapped on pallets, and wrapped in waterproof PE; container loading by our warehouse team. MOQ from trial slabs to full 20GP container.